Competent opinion
Компетентное мнение
M.Kabanov
Technology is our main accent Ikar-Impulse Ltd. specializes in the development and optimization of technical solutions for microelectronics, including design of equipment configuration, supply, commissioning and support of systems during warranty and post-warranty period. Solutions for the production of semiconductor devices and integrated circuits, including RF and microwave transistors, photonic devices, including LEDs, MEMS are offered. One of the first in Russia, the company actively promotes the advanced packaging. The slogan in the title of this publication largely reflects the company’s approach to modernization of Russian microelectronics. Michael K. Kabanov, General Manager of the Ikar-Impulse Ltd., has kindly agreed to answer the questions of our journal.
Technology is our main accent Ikar-Impulse Ltd. specializes in the development and optimization of technical solutions for microelectronics, including design of equipment configuration, supply, commissioning and support of systems during warranty and post-warranty period. Solutions for the production of semiconductor devices and integrated circuits, including RF and microwave transistors, photonic devices, including LEDs, MEMS are offered. One of the first in Russia, the company actively promotes the advanced packaging. The slogan in the title of this publication largely reflects the company’s approach to modernization of Russian microelectronics. Michael K. Kabanov, General Manager of the Ikar-Impulse Ltd., has kindly agreed to answer the questions of our journal.
М.Кабанов
Технологии – главное внимание! Компания "Икар-Импульс" специализируется на подготовке и оптимизации технологических решений для микроэлектроники, включая проектирование конфигурации оборудования, поставку, запуск и поддержку систем в гарантийный и послегарантийный период. Предлагаются решения для производства полупроводниковых приборов и интегральных схем, включая ВЧ- и СВЧ-транзисторы, приборов фотоники, в том числе светодиодов, MЭМС. Одной из первых в России компания активно продвигает технологии 3D-интеграции. Подход "Икар-Импульс" к модернизации российской микроэлектроники во многом отражает слоган, вынесенный в заголовок настоящей публикации. Генеральный директор компании, Михаил Константинович Кабанов, любезно согласился ответить на вопросы нашего журнала.
DOI: 10.22184/1993-8578.2017.73.3.6.13
Технологии – главное внимание! Компания "Икар-Импульс" специализируется на подготовке и оптимизации технологических решений для микроэлектроники, включая проектирование конфигурации оборудования, поставку, запуск и поддержку систем в гарантийный и послегарантийный период. Предлагаются решения для производства полупроводниковых приборов и интегральных схем, включая ВЧ- и СВЧ-транзисторы, приборов фотоники, в том числе светодиодов, MЭМС. Одной из первых в России компания активно продвигает технологии 3D-интеграции. Подход "Икар-Импульс" к модернизации российской микроэлектроники во многом отражает слоган, вынесенный в заголовок настоящей публикации. Генеральный директор компании, Михаил Константинович Кабанов, любезно согласился ответить на вопросы нашего журнала.
DOI: 10.22184/1993-8578.2017.73.3.6.13
A.Uvarov
Metrology systems for semiconductor industry The French company Corial was established in 2004 by a team of professionals, who had at that time 20 years of experience developing solutions for thin films etching and deposition in Nextral, Alcatel, Balzers and Unaxis companies. Corial’s headquarters and manufacturing plant are located in Grenoble district – in the heart of the French semiconductor industry. The company develops and manufactures equipment for plasma etching and plasma enhanced deposition, which is used in the manufacture of microelectronics, photonics, photovoltaics, MEMS etc. The interview with Andrei Uvarov (on the left in the photo), R&D project manager, is devoted to innovations of Corial.
Metrology systems for semiconductor industry The French company Corial was established in 2004 by a team of professionals, who had at that time 20 years of experience developing solutions for thin films etching and deposition in Nextral, Alcatel, Balzers and Unaxis companies. Corial’s headquarters and manufacturing plant are located in Grenoble district – in the heart of the French semiconductor industry. The company develops and manufactures equipment for plasma etching and plasma enhanced deposition, which is used in the manufacture of microelectronics, photonics, photovoltaics, MEMS etc. The interview with Andrei Uvarov (on the left in the photo), R&D project manager, is devoted to innovations of Corial.
А.Уваров
Инновационные решения для плазмохимических процессов Французская компания Corial была создана в 2004 году специалистами, имевшими на тот момент 20-летний опыт разработки решений для травления и осаждения тонких пленок в фирмах Nextral, Alcatel, Balzers и Unaxis. Штаб-квартира и производство Corial расположены в округе Гренобль – центре французской полупроводниковой промышленности. Компания разрабатывает и выпускает оборудование для плазмохимического травления и плазмохимического осаждения из газовой фазы, которое применяется в производстве изделий микроэлектроники, фотоники, фотовольтаики, МЭМС и в других областях. Об инновациях Corial рассказал Андрей Уваров (слева на фото), руководитель отдела разработок.
DOI: 10.22184/1993-8578.2017.73.3.14.16
Инновационные решения для плазмохимических процессов Французская компания Corial была создана в 2004 году специалистами, имевшими на тот момент 20-летний опыт разработки решений для травления и осаждения тонких пленок в фирмах Nextral, Alcatel, Balzers и Unaxis. Штаб-квартира и производство Corial расположены в округе Гренобль – центре французской полупроводниковой промышленности. Компания разрабатывает и выпускает оборудование для плазмохимического травления и плазмохимического осаждения из газовой фазы, которое применяется в производстве изделий микроэлектроники, фотоники, фотовольтаики, МЭМС и в других областях. Об инновациях Corial рассказал Андрей Уваров (слева на фото), руководитель отдела разработок.
DOI: 10.22184/1993-8578.2017.73.3.14.16
P.Michel
Thin-film technologies and plasma systems from Japan E + H Metrology GmbH (Karlsruhe, Germany) traces its history back to 1968, when Wilfried Eichhorn and Thaddaeus Hausmann have founded the Eichhorn + Hausmann OHG, which was engaged in development linear capacitive distance sensors for machinery. In 1978, the company introduced its first measurement system for the semiconductor industry. In 2008, E + H Metrology has got the modern brand name. Currently, about 80% of the company's turnover is generated from metrology solutions for the semiconductor industry and related industries. Peter Michel, Metrology Manager at E + H Metrology, told us about metrology tools.
Thin-film technologies and plasma systems from Japan E + H Metrology GmbH (Karlsruhe, Germany) traces its history back to 1968, when Wilfried Eichhorn and Thaddaeus Hausmann have founded the Eichhorn + Hausmann OHG, which was engaged in development linear capacitive distance sensors for machinery. In 1978, the company introduced its first measurement system for the semiconductor industry. In 2008, E + H Metrology has got the modern brand name. Currently, about 80% of the company's turnover is generated from metrology solutions for the semiconductor industry and related industries. Peter Michel, Metrology Manager at E + H Metrology, told us about metrology tools.
П.Михел
Метрологические системы для полупроводниковой промышленности Компания E + H Metrology из Карлсруэ (Германия) ведет свою историю с 1968 года, когда Вильфрид Айххорн и Таддэус Хаусманн основали фирму Eichhorn+Hausmann, которая занималась разработкой линейных емкостных датчиков расстояния для машиностроения. В 1978 году компания представила свою первую измерительную систему для полупроводниковой отрасли. Современное название E + H Metrology получила в 2008 году. В настоящее время около 80% бизнеса компании приходится на долю метрологических решений для полупроводниковой промышленности и смежных отраслей. Об измерительном оборудовании E + H Metrology рассказал Петер Михел, менеджер по метрологическим системам.
DOI: 10.22184/1993-8578.2017.73.3.18.20
Метрологические системы для полупроводниковой промышленности Компания E + H Metrology из Карлсруэ (Германия) ведет свою историю с 1968 года, когда Вильфрид Айххорн и Таддэус Хаусманн основали фирму Eichhorn+Hausmann, которая занималась разработкой линейных емкостных датчиков расстояния для машиностроения. В 1978 году компания представила свою первую измерительную систему для полупроводниковой отрасли. Современное название E + H Metrology получила в 2008 году. В настоящее время около 80% бизнеса компании приходится на долю метрологических решений для полупроводниковой промышленности и смежных отраслей. Об измерительном оборудовании E + H Metrology рассказал Петер Михел, менеджер по метрологическим системам.
DOI: 10.22184/1993-8578.2017.73.3.18.20
Ts.Kawabe
Thin-film technologies and plasma systems from Japan In 1979, in Kyoto, the ancient capital of Japan, a small laboratory was established to develop the equipment for chemical vapor deposition (CVD) for semiconductor industry. This laboratory was the first facility of SAMCO International, an innovative developer of plasma solutions. Over the years the company has grown, expanded its product portfolio, opened representative offices, service divisions and centers of research and development in Asia (China, Taiwan, South Korea, Singapore, Vietnam), North America (USA) and Europe (Liechtenstein), changed its name to SAMCO Inc. and had an IPO on the Tokyo stock exchange. Currently, SAMCO employs about 170 people, and the sales of the company exceed 5.3 billion Japanese yen. In 2014, SAMCO’s stock listing was transferred to the first section of the Tokyo stock exchange, where the shares of the companies with the largest capitalization are traded. Mr. Tsukasa Kawabe (on the right in the photo), Director, Member of the Board, Executive Vice President (Global Business) at SAMCO Inc., told us about solutions for the semiconductor industry.
Thin-film technologies and plasma systems from Japan In 1979, in Kyoto, the ancient capital of Japan, a small laboratory was established to develop the equipment for chemical vapor deposition (CVD) for semiconductor industry. This laboratory was the first facility of SAMCO International, an innovative developer of plasma solutions. Over the years the company has grown, expanded its product portfolio, opened representative offices, service divisions and centers of research and development in Asia (China, Taiwan, South Korea, Singapore, Vietnam), North America (USA) and Europe (Liechtenstein), changed its name to SAMCO Inc. and had an IPO on the Tokyo stock exchange. Currently, SAMCO employs about 170 people, and the sales of the company exceed 5.3 billion Japanese yen. In 2014, SAMCO’s stock listing was transferred to the first section of the Tokyo stock exchange, where the shares of the companies with the largest capitalization are traded. Mr. Tsukasa Kawabe (on the right in the photo), Director, Member of the Board, Executive Vice President (Global Business) at SAMCO Inc., told us about solutions for the semiconductor industry.
Ц.Кавабе
Тонкопленочные технологии и плазмотехнические системы из Японии В 1979 году в Киото, древней столице Японии, была создана небольшая лаборатория по разработке оборудования для химического осаждения из газовой фазы (CVD) для полупроводниковой отрасли, получившая название SAMCO International. С годами компания выросла, расширила продуктовую линейку, открыла представительства, сервисные подразделения и центры исследований и разработок в Азии (Китай, Тайвань, Южная Корея, Сингапур, Вьетнам), Северной Америке (США) и Европе (Лихтенштейн), изменила название на SAMCO Inc. и прошла процедуру IPO на Токийской фондовой бирже. В настоящее время в SAMCO работают около 170 человек, а оборот компании превышает 5,3 млрд японских иен. С 2014 года акции SAMCO торгуются в первой секции биржи, то есть в числе компаний с наибольшей капитализацией. О решениях для полупроводниковой отрасли рассказал Цукаса Кавабе (справа на фото), член правления, исполнительный вице-президент SAMCO Inc.
DOI: 10.22184/1993-8578.2017.73.3.22.24
Тонкопленочные технологии и плазмотехнические системы из Японии В 1979 году в Киото, древней столице Японии, была создана небольшая лаборатория по разработке оборудования для химического осаждения из газовой фазы (CVD) для полупроводниковой отрасли, получившая название SAMCO International. С годами компания выросла, расширила продуктовую линейку, открыла представительства, сервисные подразделения и центры исследований и разработок в Азии (Китай, Тайвань, Южная Корея, Сингапур, Вьетнам), Северной Америке (США) и Европе (Лихтенштейн), изменила название на SAMCO Inc. и прошла процедуру IPO на Токийской фондовой бирже. В настоящее время в SAMCO работают около 170 человек, а оборот компании превышает 5,3 млрд японских иен. С 2014 года акции SAMCO торгуются в первой секции биржи, то есть в числе компаний с наибольшей капитализацией. О решениях для полупроводниковой отрасли рассказал Цукаса Кавабе (справа на фото), член правления, исполнительный вице-президент SAMCO Inc.
DOI: 10.22184/1993-8578.2017.73.3.22.24
D.Krakhin
Creation of high-tech infrastructure as natural stage of development of startups Center for Nanotechnologies and Nanomaterials of the Republic of Mordovia is one of 12 nanotechnology centers established by the Fund for infrastructure and educational programs RUSNANO together with regional investors. Dmitry Krakhin, CEO, tells us about projects and prospects of development of Saransk nanotechnology center.
Creation of high-tech infrastructure as natural stage of development of startups Center for Nanotechnologies and Nanomaterials of the Republic of Mordovia is one of 12 nanotechnology centers established by the Fund for infrastructure and educational programs RUSNANO together with regional investors. Dmitry Krakhin, CEO, tells us about projects and prospects of development of Saransk nanotechnology center.
Д.Крахин
Создание высокотехнологичной инфраструктуры – закономерный этап развития стартапов Центр нанотехнологий и наноматериалов Республики Мордовия – один из 12-ти нанотехнологических центров, созданных Фондом инфраструктурных и образовательных программ РОСНАНО совместно с региональными инвесторами. О стратегиях, проектах и перспективах развития саранского наноцентра рассказал генеральный директор Дмитрий Крахин.
DOI: 10.22184/1993-8578.2017.73.3.26.30
Создание высокотехнологичной инфраструктуры – закономерный этап развития стартапов Центр нанотехнологий и наноматериалов Республики Мордовия – один из 12-ти нанотехнологических центров, созданных Фондом инфраструктурных и образовательных программ РОСНАНО совместно с региональными инвесторами. О стратегиях, проектах и перспективах развития саранского наноцентра рассказал генеральный директор Дмитрий Крахин.
DOI: 10.22184/1993-8578.2017.73.3.26.30
Nanotechnology
Нанотехнологии
P.Afanasyev, S.Ilyin, V.Luchinin
Innovative energy technosphere. Energy recovery from environment The article analyzes the modern energy technosphere that is one of the key high-tech social-oriented area of creation a comfortable, safe and cost effective environment. The tendencies and prospects of development of flexible hybrid nano-energetics based on energy recovery from the environment and the human body are considered.
Innovative energy technosphere. Energy recovery from environment The article analyzes the modern energy technosphere that is one of the key high-tech social-oriented area of creation a comfortable, safe and cost effective environment. The tendencies and prospects of development of flexible hybrid nano-energetics based on energy recovery from the environment and the human body are considered.
П.Афанасьев, С.Ильин, В.Лучинин
Инновационная энерготехносфера. Рекуперация энергии из окружающей среды Представлен анализ современной энерготехно¬сферы – одного из ключевых наукоемких социально-ориентированных направлений создания комфортной, безопасной и экономически эффективной среды обитания. Рассмотрены тенденции и перспективы развития гибкой гибридной наноэнергетики, основанной на рекуперации энергии из окружающей среды и тела человека.
УДК 621.311.25, ВАК 05.14.08, DOI: 10.22184/1993-8578.2017.73.3.38.44
Инновационная энерготехносфера. Рекуперация энергии из окружающей среды Представлен анализ современной энерготехно¬сферы – одного из ключевых наукоемких социально-ориентированных направлений создания комфортной, безопасной и экономически эффективной среды обитания. Рассмотрены тенденции и перспективы развития гибкой гибридной наноэнергетики, основанной на рекуперации энергии из окружающей среды и тела человека.
УДК 621.311.25, ВАК 05.14.08, DOI: 10.22184/1993-8578.2017.73.3.38.44
Теги: energy recovery energy technosphere nano-energetics thin film technology наноэнергетика рекуперация энергии тонкопленочные технологии энерготехносфера
N.Murashova, A.Polyakova, E.Yurtov
Analysis of dynamics of scientific publications for areas related to nanotechnology and extraction Publication dynamics in the ScienceDirect database for the period from 1980 to 2015 was analyzed for the areas related to nanotechnology and extraction. The most dynamically developing directions of research were determined.
Analysis of dynamics of scientific publications for areas related to nanotechnology and extraction Publication dynamics in the ScienceDirect database for the period from 1980 to 2015 was analyzed for the areas related to nanotechnology and extraction. The most dynamically developing directions of research were determined.
Н.Мурашова, А.Полякова, Е.Юртов
Анализ динамики научных публикаций в областях, связанных с нанотехнологией и экстракцией Проведен анализ динамики публикаций в базе данных ScienceDirect за период с 1980 по 2015 год в областях, связанных с нанотехнологией и экстракцией, определены наиболее динамично развивающиеся направления исследований.
УДК 66.061.3, ВАК 02.00.02, DOI: 10.22184/1993-8578.2017.73.3.46.54
Анализ динамики научных публикаций в областях, связанных с нанотехнологией и экстракцией Проведен анализ динамики публикаций в базе данных ScienceDirect за период с 1980 по 2015 год в областях, связанных с нанотехнологией и экстракцией, определены наиболее динамично развивающиеся направления исследований.
УДК 66.061.3, ВАК 02.00.02, DOI: 10.22184/1993-8578.2017.73.3.46.54
Теги: development trends of scientific fields extraction nanotechnology number of publications тенденции развития научных направлений число публикаций экстракция
Nanomaterials
Наноматериалы
F.Makarov, A.Ponomarenko, R.Zakharov, I.Dzyubinsky, S.Ivanov, A.Glebov, M.Lebedev
Creation of tube shells of fuel elements using composite materials based on silicon carbide The nuclear accident in Fukushima in 2011 showed special danger of steam-zirconium reaction that occurs when the temperature of the fuel element shell rise due to loss of coolant. In this regard, the programs on the development of new materials for fuel elements, which are resistant to accidents of this kind and able to significantly improve the safety of nuclear reactors, are of particular relevance.
Creation of tube shells of fuel elements using composite materials based on silicon carbide The nuclear accident in Fukushima in 2011 showed special danger of steam-zirconium reaction that occurs when the temperature of the fuel element shell rise due to loss of coolant. In this regard, the programs on the development of new materials for fuel elements, which are resistant to accidents of this kind and able to significantly improve the safety of nuclear reactors, are of particular relevance.
Ф.Макаров, А.Пономаренко, Р.Захаров, И.Дзюбинский, С.Иванов, А.Глебов, М.Лебедев
Создание труб-оболочек твэлов из композиционных материалов на основе карбида кремния Авария на АЭС в Фукусиме в 2011 году показала особую опасность паро-циркониевой реакции, возникающей при повышении температуры оболочек твэлов из-за потери теплоносителя. В связи с этим особую актуальность приобрели программы по разработке новых материалов твэлов, устойчивых к авариям такого рода и способных существенно повысить безопасность атомных реакторов.
УДК 621.039.548, ВАК 05.14.03, DOI: 10.22184/1993-8578.2017.73.3.60.67
Создание труб-оболочек твэлов из композиционных материалов на основе карбида кремния Авария на АЭС в Фукусиме в 2011 году показала особую опасность паро-циркониевой реакции, возникающей при повышении температуры оболочек твэлов из-за потери теплоносителя. В связи с этим особую актуальность приобрели программы по разработке новых материалов твэлов, устойчивых к авариям такого рода и способных существенно повысить безопасность атомных реакторов.
УДК 621.039.548, ВАК 05.14.03, DOI: 10.22184/1993-8578.2017.73.3.60.67
Теги: composite material fuel element nanomaterial silicon carbide карбид кремния композиционный материал наноматериал твэл
Test & Measurement
Контроль и измерения
I.Yaminsky, A.Akhmetova, G.Meshkov
Physical methods for detection of viruses and bacteria, using tools of scanning probe microscopy Biological scanning probe microscopy in thirty years has successfully developed from observation of biomacromolecules and biological micro-objects to the study of nature with high spatial and temporal resolution. This area of bionanoscopy makes steps in the field of medical diagnostics, development of new drugs, creation of biomedical products and tools. Advanced Technologies Center contributes to the development of new areas of biomedical probe microscopy.
Physical methods for detection of viruses and bacteria, using tools of scanning probe microscopy Biological scanning probe microscopy in thirty years has successfully developed from observation of biomacromolecules and biological micro-objects to the study of nature with high spatial and temporal resolution. This area of bionanoscopy makes steps in the field of medical diagnostics, development of new drugs, creation of biomedical products and tools. Advanced Technologies Center contributes to the development of new areas of biomedical probe microscopy.
И.Яминский, А.Ахметова, Г.Мешков
Физические методы обнаружения вирусов и бактерий c использованием инструментов сканирующей зондовой микроскопии Биологическая сканирующая зондовая микроскопия прошла путь от наблюдения биомакромолекул и биологических микрообъектов к изучению живой природы с высоким пространственным и временным разрешением. Эта область бионаноскопии делает уверенные шаги в медицинской диагностике, создании биомедицинских препаратов и инструментов. Свой вклад в развитие биомедицинской СЗМ вносит "Центр перспективных технологий".
УДК 543.07, ВАК 05.11.13, DOI: 10.22184/1993-8578.2017.73.3.56.59
Физические методы обнаружения вирусов и бактерий c использованием инструментов сканирующей зондовой микроскопии Биологическая сканирующая зондовая микроскопия прошла путь от наблюдения биомакромолекул и биологических микрообъектов к изучению живой природы с высоким пространственным и временным разрешением. Эта область бионаноскопии делает уверенные шаги в медицинской диагностике, создании биомедицинских препаратов и инструментов. Свой вклад в развитие биомедицинской СЗМ вносит "Центр перспективных технологий".
УДК 543.07, ВАК 05.11.13, DOI: 10.22184/1993-8578.2017.73.3.56.59
Теги: atomic force microscope bacteria biochip biosensor scanning capillary microscope viruses атомно-силовой микроскоп бактерии биосенсор биочип вирусы сканирующий капиллярный микроскоп
Conferences, Exhibitions, Seminars
Конференции, выставки, семинары
D.Georgiev
Equipment and technologies at VacuumTechExpo 2017 From 11 to 13 April, at Sokolniki exhibition and convention centre in Moscow, the XII International exhibition of vacuum machines, equipment and technologies VacuumTechExpo 2017 took place. The forum was organized by ITE Group with the support of the Russian Scientific and Technical Vacuum Society named after S.A. Vekshinsky. The General sponsor of exhibition was Intech Analitica JSC, sponsor – Vaсuummash JSC. VacuumTechExpo 2017 was attended by about 70 companies from seven countries. More than 2.6 thousand people from 40 regions of Russia have visited the exhibition.
Equipment and technologies at VacuumTechExpo 2017 From 11 to 13 April, at Sokolniki exhibition and convention centre in Moscow, the XII International exhibition of vacuum machines, equipment and technologies VacuumTechExpo 2017 took place. The forum was organized by ITE Group with the support of the Russian Scientific and Technical Vacuum Society named after S.A. Vekshinsky. The General sponsor of exhibition was Intech Analitica JSC, sponsor – Vaсuummash JSC. VacuumTechExpo 2017 was attended by about 70 companies from seven countries. More than 2.6 thousand people from 40 regions of Russia have visited the exhibition.
Д.Георгиев
Оборудование и технологии на VacuumTechExpo 2017 С 11 по 13 апреля в московском КВЦ "Сокольники" состоялась 12-я Международная выставка вакуумного оборудования VacuumTechExpo 2017. Форум был организован ГК ITE при поддержке Российского научно-технического вакуумного общества имени академика С.А.Векшинского. Генеральным спонсором выступила компания "Интек Аналитика", спонсором – АО "Вакууммаш". В VacuumTechExpo 2017 приняли участие около 70 компаний из семи стран мира. Посетителями выставки стали свыше 2,6 тыс. человек из 40 регионов России.
DOI: 10.22184/1993-8578.2017.73.3.32.35
Оборудование и технологии на VacuumTechExpo 2017 С 11 по 13 апреля в московском КВЦ "Сокольники" состоялась 12-я Международная выставка вакуумного оборудования VacuumTechExpo 2017. Форум был организован ГК ITE при поддержке Российского научно-технического вакуумного общества имени академика С.А.Векшинского. Генеральным спонсором выступила компания "Интек Аналитика", спонсором – АО "Вакууммаш". В VacuumTechExpo 2017 приняли участие около 70 компаний из семи стран мира. Посетителями выставки стали свыше 2,6 тыс. человек из 40 регионов России.
DOI: 10.22184/1993-8578.2017.73.3.32.35
Education
Образование
I.Yaminsky
Secret of muddler In Nanotechnologies YICC, children learn to solve practical problems using 3D modeling, 3D printing, 3D scanning, 3D machining and nanotechnologies.
Secret of muddler In Nanotechnologies YICC, children learn to solve practical problems using 3D modeling, 3D printing, 3D scanning, 3D machining and nanotechnologies.
И.Яминский
Секрет толкушки для пюре В ЦМИТ "Нанотехнологии" дети учатся решать практические проблемы с использованием 3D-моделирования, 3D-печати, 3D-сканирования, 3D-механообработки, нанотехнологий.
УДК 374, ВАК 13.00.08, DOI: 10.22184/1993-8578.2017.73.3.72.75
Секрет толкушки для пюре В ЦМИТ "Нанотехнологии" дети учатся решать практические проблемы с использованием 3D-моделирования, 3D-печати, 3D-сканирования, 3D-механообработки, нанотехнологий.
УДК 374, ВАК 13.00.08, DOI: 10.22184/1993-8578.2017.73.3.72.75
Теги: 3d machining 3d-механообработка centers programming scanning probe microscope обрабатывающие центры программирование сканирующий зондовый микроскоп
Issues of patenting
Вопросы патентования
D.Sokolov
Early patenting of inventions Conducting research, development and other work for the creation of new technology, it is necessary to decide at what point to start the patenting of inventions. As it was already noted, preparation of patent applications for high-tech solutions that are created without or with budgetary financing, should begin immediately with the start of development, before the plan will be implemented. Otherwise, at the stage of creating final product, when project costs often reach many millions of rubles, it can turn out that the product is already patented by someone.
Early patenting of inventions Conducting research, development and other work for the creation of new technology, it is necessary to decide at what point to start the patenting of inventions. As it was already noted, preparation of patent applications for high-tech solutions that are created without or with budgetary financing, should begin immediately with the start of development, before the plan will be implemented. Otherwise, at the stage of creating final product, when project costs often reach many millions of rubles, it can turn out that the product is already patented by someone.
Д.Соколов
Раннее патентование изобретений Проводя научно-исследовательские, опытные конструкторские и другие работы по созданию новой техники, необходимо решить вопрос, в какой момент следует начинать патентование изобретений. Как уже отмечалось, оформление заявок на высокотехнологичные решения, созданные в том числе с привлечением бюджетного финансирования, необходимо начинать непосредственно с начала разработки, до того, как замысел будет реализован. Иначе, на стадии создания конечного продукта, когда затраты на проект нередко достигают многих миллионов рублей, может оказаться, что он уже кем-то запатентован.
УДК 608.3, ВАК 12.00.03, DOI: 10.22184/1993-8578.2017.73.3.76.83
Раннее патентование изобретений Проводя научно-исследовательские, опытные конструкторские и другие работы по созданию новой техники, необходимо решить вопрос, в какой момент следует начинать патентование изобретений. Как уже отмечалось, оформление заявок на высокотехнологичные решения, созданные в том числе с привлечением бюджетного финансирования, необходимо начинать непосредственно с начала разработки, до того, как замысел будет реализован. Иначе, на стадии создания конечного продукта, когда затраты на проект нередко достигают многих миллионов рублей, может оказаться, что он уже кем-то запатентован.
УДК 608.3, ВАК 12.00.03, DOI: 10.22184/1993-8578.2017.73.3.76.83
Nanomaterials
Наноматериалы
V.Lysenko
Creation and properties of ceramics based on tungsten oxide nanopowder Fine-grained (about 1 µm), dense, strong ceramics with a microhardness more than 12 HPa is created by spark plasma sintering (SPS) on the basis of tungsten oxide nanopowder.
Creation and properties of ceramics based on tungsten oxide nanopowder Fine-grained (about 1 µm), dense, strong ceramics with a microhardness more than 12 HPa is created by spark plasma sintering (SPS) on the basis of tungsten oxide nanopowder.
В.Лысенко
Создание и свойства керамики из нанопорошка оксида вольфрама Методом электроискрового спекания (Spark Plasma Sintering – SPS) на основе наноразмерного порошка оксида вольфрама создана мелкозернистая (порядка 1 мкм), плотная, прочная керамика с микротвердостью более 12 ГПа.
УДК 621.039.548, ВАК 05.14.03, DOI: 10.22184/1993-8578.2017.73.3.60.67
Создание и свойства керамики из нанопорошка оксида вольфрама Методом электроискрового спекания (Spark Plasma Sintering – SPS) на основе наноразмерного порошка оксида вольфрама создана мелкозернистая (порядка 1 мкм), плотная, прочная керамика с микротвердостью более 12 ГПа.
УДК 621.039.548, ВАК 05.14.03, DOI: 10.22184/1993-8578.2017.73.3.60.67